When we in Sweden changed to summertime it didn't automatically become +2 since apparently I didn't have it set to Stockholm. When I changed to Stockholm it changed all my appointments to one hour later.
I have some questions regarding this:
1. Can I change the time zone without it affecting all my bookings?
2. Do I have to manually change all the bookings if not?
3. Is there any way to stop this from happening if this should happen when we go back to winter time in October?
Also, when I try to manually change the time back it won't let me change it to the original time. Say it was booked for 11.30 – when I changed the time zone it changed to 12.30, but when I try to move it back it won't let me change it to 11.30 (only 11.15)
This is actually how WordPress time zone settings work and it has nothing to do with Amelia's settings. To make this work, you will have to change the time zone settings and manually change time of the already-booked appointments but you will not have this issue again in the future. Please check the explanation below:
Amelia doesn't have any time zone settings, and it relies on WordPress' General settings. Here's how it works:
All times in the back-end of Amelia will be shown exactly how you save them, so (for example) if your employee works from 09:00 - 17:00, or if there's an appointment from 09:00 - 10:00, that's how you will see them in the back-end.
If you enable "Show booking slots in client time zone" in Amelia's General settings, though, that may not be what your customers see, depending on where they're located, and to what your WordPress site has been configured.
If this option in Amelia's General settings is disabled, all times on the front-end will be the same as times in the back-end. So, if your employee's work hours are from 09:00 - 17:00 in UTC+1, with this option disabled, regardless if your customer is in UTC+1, or in UTC+10 - they will still see times from 09:00 - 17:00, so if you have customers in multiple time zones, it's advisable to enable this option in Amelia's General Settings.
Important: In order for Amelia to store correct appointment times in the database (which is almost always in UTC time zone), you need to edit the WordPress' time zone to show the city you're in (or the city in your time zone), like this:
This way, when Daylight Savings Time starts (or ends), the times will be adjusted accordingly and you won't have to worry about them anymore.
If you save your Time Zone in UTC+/- format, you may experience issues with the Daylight Savings Time:
Explanation: When you configure the time zone to be "UTC+1" it will always be UTC+1. So, if we take Belgrade, Serbia as an example - without Daylight Savings Time, it is in UTC+1 time zone, but when Daylight Savings Time starts, Belgrade is in UTC+2. If you leave the time zone to be hard-coded to UTC+1, the times that your customers book on the front-end will not be properly adjusted to what you see in the back-end.
Example with UTC+1 configured: It is mid-summer, and Belgrade is in UTC+2. "Show booking slots in client time zone" is enabled, and a customer from Belgrade opens your website to book an appointment. The working hours of your employee are set from 09:00 - 17:00 (in UTC+1), but the customer sees them as 10:00 - 18:00. This is because the time zone is hard-coded in the back-end, while on the front-end it shows the time in UTC+2. So, a customer books an appointment for 10:00, and shows up at 10:00, while you expect to see them at 09:00.
Please note: If you hard-coded the time zone, and you have booked appointments, once you switch the time zone in WordPress to your city, it will adjust the times in Amelia's appointments to fit the time zone your city is currently in. This happens because (as mentioned above) the times are saved in UTC in the database, and it's adjusted in the plugin programmatically. So, if you have a hard-coded time zone set to UTC+1, and someone booked an appointment for 09:00, that time is saved as 08:00 in the database. When you change the time zone to your city (which is now in UTC+2), the appointment time will be adjusted to the time saved in the database 08:00 + 2:00, so the appointment time will switch to 10:00. The only solution, in this case, is to manually modify the appointment times, but it's the only way to make sure your time zone is properly configured, and that the future appointments will be saved and displayed correctly both for you and your customers on the front-end.
Summary: When you select the city you're in, in WordPress' General Settings, the system automatically calculates the Daylight Savings Time, and shifts the clock accordingly, so if you have any issues with what you see on the front-end vs what you see in the back-end, always check the Time Zone in WordPress
Hope this helps you.
Please reach out to us if you have any other questions.
Hello,
I had the time zone in Wordpress set to +1.
When we in Sweden changed to summertime it didn't automatically become +2 since apparently I didn't have it set to Stockholm. When I changed to Stockholm it changed all my appointments to one hour later.
I have some questions regarding this:
1. Can I change the time zone without it affecting all my bookings?
2. Do I have to manually change all the bookings if not?
3. Is there any way to stop this from happening if this should happen when we go back to winter time in October?
Thank you
Also, when I try to manually change the time back it won't let me change it to the original time. Say it was booked for 11.30 – when I changed the time zone it changed to 12.30, but when I try to move it back it won't let me change it to 11.30 (only 11.15)
Hello Ebba,
Thank you for reaching out to us.
This is actually how WordPress time zone settings work and it has nothing to do with Amelia's settings. To make this work, you will have to change the time zone settings and manually change time of the already-booked appointments but you will not have this issue again in the future. Please check the explanation below:
Amelia doesn't have any time zone settings, and it relies on WordPress' General settings. Here's how it works:
All times in the back-end of Amelia will be shown exactly how you save them, so (for example) if your employee works from 09:00 - 17:00, or if there's an appointment from 09:00 - 10:00, that's how you will see them in the back-end.
If you enable "Show booking slots in client time zone" in Amelia's General settings, though, that may not be what your customers see, depending on where they're located, and to what your WordPress site has been configured.
If this option in Amelia's General settings is disabled, all times on the front-end will be the same as times in the back-end. So, if your employee's work hours are from 09:00 - 17:00 in UTC+1, with this option disabled, regardless if your customer is in UTC+1, or in UTC+10 - they will still see times from 09:00 - 17:00, so if you have customers in multiple time zones, it's advisable to enable this option in Amelia's General Settings.
Important: In order for Amelia to store correct appointment times in the database (which is almost always in UTC time zone), you need to edit the WordPress' time zone to show the city you're in (or the city in your time zone), like this:
This way, when Daylight Savings Time starts (or ends), the times will be adjusted accordingly and you won't have to worry about them anymore.
If you save your Time Zone in UTC+/- format, you may experience issues with the Daylight Savings Time:
Explanation: When you configure the time zone to be "UTC+1" it will always be UTC+1. So, if we take Belgrade, Serbia as an example - without Daylight Savings Time, it is in UTC+1 time zone, but when Daylight Savings Time starts, Belgrade is in UTC+2. If you leave the time zone to be hard-coded to UTC+1, the times that your customers book on the front-end will not be properly adjusted to what you see in the back-end.
Example with UTC+1 configured: It is mid-summer, and Belgrade is in UTC+2. "Show booking slots in client time zone" is enabled, and a customer from Belgrade opens your website to book an appointment. The working hours of your employee are set from 09:00 - 17:00 (in UTC+1), but the customer sees them as 10:00 - 18:00. This is because the time zone is hard-coded in the back-end, while on the front-end it shows the time in UTC+2. So, a customer books an appointment for 10:00, and shows up at 10:00, while you expect to see them at 09:00.
Please note: If you hard-coded the time zone, and you have booked appointments, once you switch the time zone in WordPress to your city, it will adjust the times in Amelia's appointments to fit the time zone your city is currently in. This happens because (as mentioned above) the times are saved in UTC in the database, and it's adjusted in the plugin programmatically. So, if you have a hard-coded time zone set to UTC+1, and someone booked an appointment for 09:00, that time is saved as 08:00 in the database. When you change the time zone to your city (which is now in UTC+2), the appointment time will be adjusted to the time saved in the database 08:00 + 2:00, so the appointment time will switch to 10:00. The only solution, in this case, is to manually modify the appointment times, but it's the only way to make sure your time zone is properly configured, and that the future appointments will be saved and displayed correctly both for you and your customers on the front-end.
Summary: When you select the city you're in, in WordPress' General Settings, the system automatically calculates the Daylight Savings Time, and shifts the clock accordingly, so if you have any issues with what you see on the front-end vs what you see in the back-end, always check the Time Zone in WordPress
Hope this helps you.
Please reach out to us if you have any other questions.
Kind Regards,
Uros Jovanovic
[email protected]
Rate my support
Try our FREE mapping plugin! MapSVG - easy Google maps, interactive SVG maps, and floor plans, choropleth maps and much more - https://wordpress.org/plugins/mapsvg-lite-interactive-vector-maps/
wpDataTables: FAQ | Facebook | Twitter | Instagram | Front-end and back-end demo | Docs
Amelia: FAQ | Facebook | Twitter | Instagram | Amelia demo sites | Docs | Discord Community
You can try wpDataTables add-ons before purchasing on these sandbox sites:
Powerful Filters | Gravity Forms Integration for wpDataTables | Formidable Forms Integration for wpDataTables | Master-Detail Tables